ChemicaLogic's SteamTab Companion gives you instant access to the complete properties of water and steam. Based on the international standard IAPWS-95 formulation, SteamTab Companion is being made available at no cost. You can download a fully functional version.
Steam Table download pc
Download: https://jinyurl.com/2vzEc4
SteamTab Companion is a win32 application and will run on any Windows platform. The SteamTab Companion application is a single executable of about 285 kbytes. (Version 2.0; updated November 25, 2003)
The steam tables section of Uconeer calculates the physical properties of ice, water and steam in all the units included in Uconeer, and in your own custom units. The IAPWS IF-97 formulations are used where relevant. These software steam tables contain data for 16 fixed and 18 variable properties from -100 to 800C (-148 to 1472F) and up to 1000 bar abs (14500 psia). Some water and steam properties extend up to 2000C (3632F) at pressures below 500 bar abs (7250 psia).
The variable properties for ice, water and steam included in the Steam Tables (where applicable) are enthalpy, entropy, internal energy, density (specific volume), enthalpy of vaporization, viscosity, heat capacity at constant pressure, heat capacity at constant volume, velocity of sound, thermal conductivity, surface tension, thermal expansion coefficient, isothermal compressibility, isentropic exponent, compressibilty factor "Z", dielectric constant, refractive index and melting (freezing) point.
This downloadable Steam Tables software replaces printed tables but covers many more physical properties of ice, water and steam and eliminates the need to interpolate between data points. Like all of Uconeer, the steam tables have context sensitive on-line Help. This program can be used to calculate physical properties for known temperature and pressure conditions, or it can search for the conditions that give rise to particular physical property values of enthalpy, entropy or density for water and/or steam.
For saturated properties of ice, water or steam only the temperature or pressure needs to be entered. The corresponding saturation pressure or temperature, and the physical properties of the ice, water or steam at that condition, will be calculated. Properties for subcooled water or superheated steam can be calculated by specifying both the temperature and pressure. Absolute or gauge pressures can be used in all the steam table functions.
The units to be used for data entry and display of the physical properties of the ice, water and steam can be selected in sets or individually. The program stores the selection of units at shut down for use in the next session. The sets of units available include SI, Imperial, Customary (USA) and European Units. The wavelength used in calculating the refractive index, and the local atmospheric pressure used to calculate gauge pressure, are also set on this page.
DeskTop Steam is included in the WinSteam package and may also be purchased separately. DeskTop Steam is an advanced steam property calculator which runs in its own window. The calculator image below illustrates some of its features including flexible unit selection and an intuitive, standard Windows user interface. DeskTop Steam is an ideal replacement for the ASME steam property tables and it calculates the properties at the exact point you desire so there is no need for interpolation.
DeskTop Steam is an advanced steam property calculator which runs in its own window. The calculator image below illustrates some of its features including flexible unit selection and an intuitive, standard Windows user interface. DeskTop Steam is an ideal replacement for your steam table book and it calculates the properties at the exact point you desire so there is no need for interpolation.
WinSteam includes DeskTop Steam, which allows the user to select either the IFC 1967 or the IF97 steam formulations. The separate version of DeskTop Steam is identical to the one included with WinSteam except that the feature, which allows the use of the IFC 1967 steam formulations, is disabled.
Read before download: You must be 18 years or older, or deemed an adult, to install Cheat Engine. Cheat engine is for private and educational purposes only. Before you attach Cheat Engine to a process, please make sure that you are not violating the EULA/TOS of the specific game/application. cheatengine.org does not condone the illegal use of Cheat Engine
I'm glad to announce the release of Cheat Engine 7.5 which has some really neat improvements over 7.4My patreon members can get it here (The public release will be here any day now. Waiting for the advertisers / network owners to accept it) Please reports bugs and give suggestions to improve Cheat Engine so next version can be even greater!Changes:from patreon 7.4.3 to public 7.5:removed the driver requirement for the access memory regions tool
added 1 byte jmp instructions (that will install an exeption handler and place an int3 at the location)
added a scanoption so you can skip unpaged memory. (should prevent targets from eating up RAM when scanned)
reassemble() now rewrites an instruction using multiple lines when needed
make some error messages more descriptive
added an option to center the highlighted disassembler code to the center
added an explanation why the driver won't load and a link with info on how to get it to load for now
memoryrecord hotkeys can now be disabled individually
codefilter: unwind info now gives less bad results
added support for pseudo-ops like cmpss/sd/ps/pd
lua: added ceserver commands
lua: show a stacktrace on execution error
lua: added convertToUTF8(stringbytetable, regioncode)
made loading CT files with signatures possible under wine and proton
from patreon 7.4.2 to patreon 7.4.3:ceserver: pipe support (mono data dissector)
ceserver: added change memory protection capability
ceserver: Available options can now be sent to the CE GUI
.netinfo: Replaced the fields view with a tree
network config: The processlist now has focus after opening a server
lua: added virtualstringtree
lua: added invertColor
lua: added disassembleBytes(bytestring)
autoassembler: now a visual warning is shown when nearby allocation fails
autoassembler: the templates now generate 14 byte jmp safe original code blocks as well
pointerscan now has a deviation option for "pointer must end with offset" to help find pointers back after update
ultimap: added copy selected results to clipboard
from patreon 7.4.1 to patreon 7.4.2ipt: Added intel process trace feature provided by microsoft.
ceserver: Improve the modulelist fetch speed, more stable
ceserver: option to disconnect from closed ceservers
ceserver: the discovery list is now also a history list
ceserver: implement injection on arm64 as well
ceserver: also gets the fpu registers now
assembler x86_64: prefer mov rax,[rip+xxx] over mov rax,[imm64]
disasembler x86_64: switch from r#l to r#b because why not
mono: the dll now has a versioncheck so that you don't accidentally mix monodatacollector dll's
mono: deal with situations where there is no mainform
mono/.net: the methodlist is now sorted by name
better arm disassembler and assembler
better arm64 disassembler and assembler
the scanregions can be saved/loaded upon close/start ce (seperate option in settings)
added an option to skip loading .PDB files
a lot more functions are exposed to newstate threads
added ranges scans to groupscan
freeze+allow increase/decrease now also looks if the value is signed
trainers: Forms and controls now scale based on DPI
changing record showassigned/showashex now also applies to other selected entries
texttraces now don't save as .cetrace but as .txt now
ccode: #include now searches table files for files there as well
ccode: the internal symbolhandler can now deal with stdcalled function symbols
lua: added ImageIndex property to TTreeNode
lua: added OnValuechanged and OnValueChangedByUser callbacks to MemoryRecord objects
lua: added getOpenedFileSize()
lua: added onHelpEvent callback
lua: added releaseDebugFiles()
lua: added enumRegisteredSymbolLists() and enumRegisteredSymbols()
lua: added getBitmap method to ImageList objects
from public 7.4 to patreon 7.4.1:added .Visible property to treenode entries
added .VisibleRowCount and .TopItem to listviews
added arm64 disassembling and assembling
added lua function "runCommand"
added a radiobutton to select if the generated script will use 5 or 14 byte jmps.
conditional jumps can now deal 2gb+ destinations (will get rewritten)
dotnetinfo: Performance improvement
memory record hotkeys now have a "Only while down" option
Updated the dbghelp to a more recent version which can better handle nowadys pdb symbols
different memory allocations now get placed within the initial allocation block. Protection is changed afterwards
tracer can now step over rep instructions
lua stringstream now inherits from memorystream, so you have access to the Memory field
lua: Added a callback for whenever the structure list is modified
added architecture distinguishing to ceserver
pressing escape in the hotkey form will now close it
added nested structure support
added string based custom types
ctrl+enter in the disassembler now shows relative addresses from that point
the diffcount in "find out what accessess/writes" will now stay even when disabling the option to find the number of different addresses an instruction accesses
Fixes:from patreon 7.4.3 to public 7.5:vehdebug: Fixed a case where a new thread creation or other event would cause another event that would trigger at exactly the same time to get the exception ignored and just continued
monodatacollector: fixed invoke method
dotnetdatacollector: Fixed issue of loading a wrong version of dbgshim.dll
fixed disassembling cvtdq2pd
from patreon 7.4.2 to patreon 7.4.3:ceserver: Fixed extension loading in some cases
ceserver: fixed stepping on x86 targets
fixed the name showing as [physical memory] instead of the filename when opening a file
fixed a rare error when scanning using specific options
fixed some documentation in celua at some points
fixed stackview in "more info" being garbage/access violation
fixed tracer search for instructions ending with ]
fixed enumExports lua function
fixed issue where vehdebug would crash
fixed the assembler from handing [rex+reg*x] as a symbol when debugging
fixed the disassembler backlist
fixed termination issue on the memscan object
from patreon 7.4.1 to patreon 7.4.2Fixed the tracer search for instructions ending with a ]
VEH debug: Fixed the potential of invalid handles being used
Kernelmode debug and VEH debug: Fixed setting context on non suspended threads
fixed the lua_pcallk delegate in the c# plugin example
fixed speedhack on wine 7.0
fixed high dpi issue of structure dissect on first view
fixed high dpi issue on find what access/writes dialogs
restored the anchor editor (was gone in 7.4.1)
fixed .net info instance lookup issue
fixed customtypes getting marked as string (bug introduced in 7.4.1)
fixed runcommand
fixed modalforms from losing their text color internally (bug introduced in 7.4.1)
mac: fixed some progressbars not properly updating
from public 7.4 to patreon 7.4.1:fixed the all type not finding 4 types when double was deselected
fixed the "all" type when not using double
fixed ccode esp access in 32-bit and "reg"f types
fixed disassembling when using binutils for disassembly
fixed the tablefiles menulist eating memory because they didn't get deleted properly
fixed .net issues that use obfoscated modules and missing metadata
fixed paring value starting with a - or +
fixed assembling pmovmskb
fixed disassembling vgather* vex256 instructions and allow usage of xmm/ymm registers as address (for instructions that allow it. Like this one)
fixed the addresslist not giving a proper error when using multiple enable or disable section
fixed error when using ctrl for speedhack hotkeys
fixed the groupscan command parser from assigning wildcard to the wrong combobox
fixed disassembling xchg eax/rax,xxx
fixed lua custom type registering as float when using the non lua function method
fixed small memoryscan issue for data at the end of a memoryblock
ccode doesn't register useless symbols anymore
2ff7e9595c
Commentaires